DS-1212 1.9v - SELF PROPELLED SLAB SCISSOR LIFT

Introduction

DAEDALUS® Self Propelled Slab Scissor Lifts are built to deliver Extraordinary Performance and Versatility. These indigenously designed and manufactured scissor lifts boast Robust Quality, Excellent Stability & Long-lasting Efficiency. They are exceptionally mobile, letting you maneuver in tight spaces. They are an ideal choice for indoor and outdoor worksites on flat, leveled, and firm surfaces.

Features:

1. Extension Deck.
2. Anti-Skid Platform.
3. Dual Front Wheel Hydraulic Drive.
4. Foldable Guardrails (Optional)
5. Pull out battery tray.
6. The electric line to the platform.
7. Solid Non-Marking tyres.
8. Electromagnetic Brakes.
9. Forklift Pockets

Safety Systems:

1. Manual emergency relief valves.
2. Overload sensors & Indicators (Optional).
3. Tilt Sensors.
4. Flashing Beacons.
5. In-built smart battery charger

Specification

Models		DS-1212 1.9v
Measurements		Feet	Metric
Maximum Working Height		39ft	12m
Maximum Platform Height		32ft	10m
Lowered Platform Height		5ft	1.5m
Platform Length -	Without Extension	6.23ft	1.9m
	With Extension	8.8ft	2.7m
Extension Deck		2.6ft	0.8m
Platform Width		3.9ft	1.2m
Guardrail Height		3.6ft	1.1m
Vehicle Dimensions	Height	8.6ft	2.6m
	Length	6.4ft	1.9m
	Width	4.1ft	1.25m
Ground Clearence		0.3ft	90mm

Productivity

Maximum Occupancy	2 People
Lift Capacity	350Kgs
Extension Deck	125Kgs
Drive Speed	2.5Kmph
Turning Radius - Outside	2.4m
Raise / Lower Speed	80/65
Control	Proportional Control
Drive	Dual Front Wheel Hydraulic Drive
Brakes	Electromagnetic Brakes
Tyres (Solid Non-Marking)	323*100

Power

Power Source	24V DC (Four 6V 225Ah Batteries)
Hydraulic Capacity	15L
Weight***	2400Kgs

Benefits of the DS-1212 1.9v

Compact 1.9m Base for Tight-Access Sites

The DS-1212 1.9v has a 1.9m base platform length - designed for access in tighter workspaces where larger lifts may struggle - making it the right choice when your site has confined aisles, doorways, or racking bays where a wider machine simply won't fit. You get full 12m working height without sacrificing access to restricted areas.

▸ 350 kg Platform Capacity for Two-Person Crews

With a 350 kg rated load, this model comfortably supports two operators along with their tools and materials in a single lift cycle. Less back-and-forth between ground and platform means faster task completion on ceiling maintenance, lighting, HVAC, or structural work at height.

▸ Extension Deck for Wider Reach Without Repositioning

The 0.8m extension deck (rated to 125 kg) gives you additional horizontal reach when you need to work slightly beyond the main platform footprint. This is particularly useful for overhead duct runs, cable trays, or sprinkler systems where repositioning the machine would cost time.

▸ Proportional Drive for Precise Manoeuvrability

The proportional hydraulic drive system lets operators vary travel speed with fine control - essential when navigating between racking, around floor-mounted equipment, or across shared pedestrian zones. There is no on/off jerk; the machine moves exactly as fast as you push the control.

▸ CE Certified to EN 280 - Meets Indian EHS and Global Compliance Standards

The DS-1212 1.9v is fully designed and manufactured to EN 280 (CE) standards. For EHS officers and safety managers, this means the machine meets internationally recognised structural, stability, and safety performance requirements - and supports your Factories Act 1948 and IS 3521 compliance obligations without needing additional third-party certification.

▸ DIVCS - In-House Vehicle Control with Built-In Fault Diagnostics

Every DS-1212 1.9v runs the Daedalus Intelligent Vehicle Control System (DIVCS), developed and supported entirely in-house. DIVCS provides real-time fault detection with plain-language error codes, so your operator or maintenance team can identify and resolve issues on-site rather than waiting for a service call. This directly reduces unplanned downtime.

▸ Non-Marking Tyres - Safe for Finished Floors

The solid non-marking tyres leave no residue on polished concrete, epoxy, or tile flooring - a practical requirement in pharmaceuticals, food processing, cleanrooms, and commercial facilities where floor contamination is unacceptable. Forklift pockets allow safe relocation between bays without requiring a separate tow vehicle.

FAQs