DS-1212 Electric Self-Propelled Scissor Lift — 12m Working Height, 350kg Capacity

Introduction

Working at 12 metres demands a machine that is stable, reliable, and precise at height. The DS-1212 is a CE-certified electric scissor lift designed for two workers, with a wide 1.2-metre platform and proportional drive control that makes repositioning in large facilities fast and safe. 

DAEDALUS® Self Propelled Slab Scissor Lifts are built to deliver Extraordinary Performance and Versatility. These indigenously designed and manufactured scissor lifts boast Robust Quality, Excellent Stability & Long-lasting Efficiency. They are exceptionally mobile, letting you maneuver in tight spaces. They are an ideal choice for indoor and outdoor worksites on flat, leveled, and firm surfaces.

Features:

1. Extension Deck.
2. Anti-Skid Platform.
3. Dual Front Wheel Hydraulic Drive.
4. Foldable Guardrails (Optional)
5. Pull out battery tray.
6. The electric line to the platform.
7. Solid Non-Marking tyres.
8. Electromagnetic Brakes.
9. Forklift Pockets

Safety Systems:

1. Manual emergency relief valves.
2. Overload sensors & Indicators (Optional).
3. Tilt Sensors.
4. Flashing Beacons.
5. In-built smart battery charger

Specification

Models		DS-1212
Measurements		Feet	Metric
Maximum Working Height		39ft	12m
Maximum Platform Height		32ft	10m
Lowered Platform Height		5.0ft	1.5m
Platform Length -	Without Extension	7.8ft	2.4m
	With Extension	10.8ft	3.3m
Extension Deck		2.9ft	0.9m
Platform Width		3.9ft	1.2m
Guardrail Height		3.6ft	1.1m
Vehicle Dimensions	Height	8.2ft	2.5m
	Length	8.2ft	2.5m
	Width	4.1ft	1.25m
Ground Clearence		0.3ft	90mm

Productivity

Maximum Occupancy**	2 People
Lift Capacity	350Kgs
Extension Deck	125Kgs
Drive Speed	2.5Kmph
Turning Radius - Outside	2.4m
Raise / Lower Speed	80/65
Control	Proportional Control
Drive	Dual Front Wheel Hydraulic Drive
Brakes	Electromagnetic Brakes
Tyres (Solid Non-Marking)	323*100

Power

Power Source	24V DC (Four 6V 225Ah Batteries)
Hydraulic Capacity	27L
Weight***	2900kg

Benefits of the DS-1212 self propelled scissor lift

▸ 2.4m Standard Platform - More Working Space Per Lift

The DS-1212 uses a wider 2.4m base platform (extending to 3.3m with the deck) compared to the narrower 1.9v variant. For sites where aisle width is not a limiting factor, the extra platform area means two operators can work side-by-side with tools, fixtures, and materials - reducing the number of ascents needed to complete a job.

▸ 12m Working Height for High-Bay Facilities

At 12m working height (10m platform height), the DS-1212 is suited to the most common high-bay warehouse ceiling height range in India - typically 9m to 12m. It handles overhead maintenance tasks including LED luminaire replacement, CCTV installation, sprinkler system work, and duct runs without the cost or complexity of a boom lift.

▸ 350 kg Capacity with Extension Deck

The main platform carries 350 kg, with the 0.9m extension deck separately rated to 125 kg. This allows one operator to work on the extension (carrying a light fitting, cable spool, or tool bag) while the other manages tasks on the main deck - practical for electrical and MEP installation work.

▸ Proportional Control - Confident Manoeuvring in Shared Spaces

Proportional drive control lets the operator modulate travel speed smoothly and precisely, which matters in warehouses where forklifts, pickers, and pedestrians share the floor. Unlike on/off drive systems, proportional control prevents sudden lurching that could destabilise loads or alarm nearby workers.

▸ CE Certified to EN 280 - Documented Safety for Compliance Teams

The DS-1212 is CE certified to EN 280, confirming that its structure, stability, safety systems, and controls have been independently verified against the international MEWP standard. This is the single most important compliance credential for EHS officers managing working-at-height risk assessments under Indian statutory requirements.

▸ DIVCS - Intelligent Diagnostics Reduce Maintenance Cost

The in-house Daedalus Intelligent Vehicle Control System (DIVCS) provides fault detection with clear error codes accessible to the operator at the ground control panel. Minor faults that would previously require a technician visit can often be identified and cleared on-site, reducing both maintenance cost and lost productive time.

▸ Electromagnetic Brakes - Stable Platform at Elevation

Electromagnetic brakes engage automatically when the machine is stationary, preventing any unintended movement while operators are working at height. Combined with tilt sensors that prevent operation on uneven ground, this gives both the operator and the EHS manager confidence that the platform will remain stable throughout the work cycle.

FAQs