DS-608 M AC Manual Pushable Scissor Lift for Safe Elevated Access

Introduction

DAEDALUS® Manual Pushable Scissor Lifts are an Economical Worksite solution without any compromise on the machine’s safety. These scissor lifts are Manually Maneuverable while their raising & lowering operations can be performed by AC / Battery Power Source as per your requirement. These machines are equipped with Pull out Screw Jack Stabilizers that enable them to level the machines. The solid Tyres on these machines enable you to utilize these machines in all conditions. These machines exhibit Least Downtime and require Minimum maintenance, thus enhancing your onsite Productivity.

Features:

1. Optional Power Source (AC / Battery Pack)
2. Anti-Skid Platform.
3. Foldable Guardrails (Optional).
4. Dual Control
5. Forklift Pockets

Safety Systems:

1. Manual Stabilizers
2. Max. Height cut off Switch
3. Flashing Beacon
4. Manual emergency relief valve

Specification

Models		DS-608M/AC
Measurements		Feet	Metric
Maximum Working Height		20ft	6m
Maximum Platform Height		15ft	4m
Lowered Platform Height		4.2ft	1.2m
Platform Length -		6.9ft	2.1m
Platform Width		3.9ft	1.2m
Guardrail Height		3.2ft	1.0m
Vehicle Dimensions	Length	7.9ft	2.3m
	Height	6.9ft	2.15m
	Width	3.9ft	1.2m
Ground Clearence		0.3ft	90mm

Productivity

Maximum Occupancy***	2 People
Lift Capacity	350Kgs
Control	Dual Control (Chassis & Platform)
Drive	NA

Power

Power Source	24V DC (Four 6V 225Ah Batteries) / 230V 50Hz Single Phase Supply
Hydraulic Capacity	20L (5.2gal)
Weight***	1700Kgs/1400Kgs

Benefits of the DS-608 M/AC

▸ Dual Power Flexibility: Operate on AC Mains or Battery Power

The DS-608 M/AC accepts both 230V single-phase AC supply and 24V DC battery power. On sites with accessible mains sockets - factory floors, warehouses, commercial fit-outs - you can plug directly into the wall and operate without waiting for a battery to charge. Battery mode is available where mains access is impractical. This flexibility makes the machine usable in a wider range of sites than battery-only pushable lifts.

▸ 350 kg Capacity - Full Two-Person Load at Just 6m 

Despite being the entry-level model in the pushable range, the DS-608 M/AC carries 350 kg - the same rated capacity as Daedalus's larger self-propelled lifts. Two operators plus a standard tool load can work simultaneously on the 2.1m x 1.2m platform. This matters for tasks like panel installation, lighting replacement, or ductwork connection where a second pair of hands at height is often necessary.

▸ Screw-Jack Stabilisers for Safe Operation on Uneven Floors

Pull-out screw-jack stabilisers allow the operator to level the machine and lock it securely before raising the platform. On older industrial floors with surface irregularities, this is a critical safety feature. The stabilisers deploy and retract quickly, adding minimal setup time while ensuring the platform remains level throughout the work cycle.

▸ Compact and Easily Repositioned Without a Drive System

The DS-608 M/AC weighs 1,400 kg (AC version) - lighter than any self-propelled model - and is manually pushed into position. For maintenance teams working on a series of tasks along a production line or across a building, the machine can be repositioned quickly by one person without operating a drive system or requiring a clear travel path.

▸ CE Certified to EN 280 - Meets Statutory Safety Requirements

The DS-608 M C is CE certified to EN 280, the international standard covering MEWP structural integrity, stability, safety systems, and control functions. For EHS officers and safety managers, this provides documented assurance that the machine has been manufactured and tested to a verifiable global standard - supporting compliance with India's Factories Act 1948 and IS 3521 without additional certification costs.

▸ Dual Control - Ground and Platform Operation

Controls are available at both the chassis (ground level) and the platform, allowing a supervisor or helper on the ground to lower the platform in an emergency without needing to climb up. This is a practical safety feature on congested sites and is required under working-at-height risk assessment best practice.

▸ Low Maintenance, High Uptime Design

With no self-propelled drive system to maintain, the DS-608 M/AC has fewer serviceable components than motorised lifts. Solid tyres eliminate puncture risk. The in-built smart charger (battery version) includes overcharge protection and fault diagnostics, extending battery life and reducing unnecessary service calls.

FAQs